tubs showers. Friday , April 20th , 2018 - 02:12:10 AM
Showering was previously something that you did when you were in a hurry. You jump in the shower, lather up, rinse off, towel dry and move on. Today, it can still be the invigorating boost you need to get your day started, but it can be much more.
Shower doors installation is something you can hire a contractor to do for you, or it is something the homeowner can do for themselves. Sometimes we have showers that are being protected by the use of curtains and then when we get a little jingle in our jeans we like to add glass doors and stop using those curtains. Do it yourself like the challenge of renovating and beautifying their homes at lower costs than it would be if they hired professional contractors to do the work.
Tubs and combination tub/shower units are usually set in place before any DWV connections are roughed-in. Its easier to verify the exact location of the drain opening this way, especially because manufacturers specifications often differ from the drain openings actual location on individual units. But before you set the unit, cut a 12-in. by 12-in. cutout in the sub-floor, centered underneath the tubs approximate drain location, to leave plenty of room for the waste and overflow (W&O) tee and tailpiece. After the tub is in place, the tub W&O fitting can be assembled, installed, and connected to the P-trap and DWV system. If the tub will be set on a slab, there should be a tub box, or opening in the slab, with a P-trap and drain already waiting to be connected to the tailpiece of the W&O fitting. In this case, the W&O will already be installed before the tub is set in place, though making the final connection will be a little tricky.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does FNF claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.